924 cam info

Where do I put this spare bolt? Good old technical help and advice from those in the know?
Posts: 142
Joined: Tue Jul 16, 2013 12:57 pm

924 cam info

Postby DHJ8 » Mon Nov 25, 2013 12:21 pm

Anyone know the clearences for the Piper PDA001 cam - anyone got a spec sheet
also looking fo a set of GAZ shocks - anyone got a spare set?

Posts: 187
Joined: Thu Apr 12, 2012 6:07 pm

Re: 924 cam info

Postby fontwell1 » Mon Nov 25, 2013 6:49 pm

Hi Dave,

I can email you a copy of the spec sheet from Piper if you send me your email to liquor@btopenworld.com.

If you look on ebay for :wheelsnthings they were selling them for around £600 a set.

Are you coming to the Racing car show?

Kind regards


Posts: 174
Joined: Tue Feb 07, 2012 9:40 pm

Re: 924 cam info

Postby karlio » Tue Nov 26, 2013 12:00 am

the cam set up here dave
http://www.pipercams.co.uk/pipercams/ww ... =11&go.y=8

cheers karl

User avatar
Posts: 306
Joined: Tue Apr 27, 2010 7:28 am

Re: 924 cam info

Postby AndyHanners » Tue Nov 26, 2013 8:57 am

I changed my 924 shocks from Leda to GAZ and regretted it.
The adjusters on the 924 GAZ shocks are a nightmare.
Much better to get the Ledas rebuilt if you can.

Posts: 142
Joined: Tue Jul 16, 2013 12:57 pm

Re: 924 cam info

Postby DHJ8 » Tue Nov 26, 2013 10:20 am

Thanks all - will email my address Phil - Karl, thanks found that on the suite but I thought the one we use is listed as PDA001 does the spec match one of the two others listed?
Thanks Hanners glad you're OK - may do as suggested the adjusters on the GAZ are a pain, but I thought overall that they were a better shock?

Posts: 549
Joined: Tue Apr 27, 2010 11:31 am

Re: 924 cam info

Postby A.Kirkham » Tue Nov 26, 2013 10:56 am

I've been a big fan of the Leda shocks, they are simple and easy to adjust - also dirt cheap to rebuild. Last 2 occasions we got Gaz to rebuild them since Leda had gone bump (before Andy Storer brought the company back to life) I think Gaz charged around £150 to rebuild all 4 (and that included postage)

Return to “Toolbox”

Who is online

Users browsing this forum: No registered users and 1 guest